Trending
Real Ear Measurement (REM) objectively measures the sound level and amplification a hearing aid delivers inside a patient's ear canal. A clinician places a soft, hair-thin silicone probe tube beside the hearing aid, with its tip near the eardrum--usually within 5 mm--and a reference microphone outside the ear. A loudspeaker plays calibrated speech-like signals or tones. The system measures the sound pressure level (SPL) reaching the eardrum and compares it with the manufacturer's prescribed targets. If the output differs from those targets across frequencies, the clinician can adjust the hearing aid's programming in real time.
REM is considered the "gold standard" for hearing aid adjustments and is recommended by the American Academy of Audiology, yet 35% of audiologists nationwide do not use it. Though not a member of that organization, I am among them and will explain why.
Supporters say REM accounts for each person's ear canal size, shape and acoustics rather than relying on averages. They also say the procedure compares in-ear output with validated clinical targets so that soft sounds are audible, speech is clear and loud sounds remain comfortable.
Supporters maintain that verified fittings significantly outperform unverified manufacturer software "first-fit" settings, especially in noisy environments. They indicate that accurate initial tuning with REM reduces repeat adjustments and hearing aid returns.
Lastly and most simply, they rest in organizational recommendations to do REM as leading organizations like the American Academy of Audiology (AAA) and the American Speech Language-Hearing Association (ASHA) state that all should want to use REM. Those who use REM are critical of those who don't, suggesting they don't to save time in the appointment and to save costs as REM equipment, probe tubes and annual calibration require an investment that some practices choose not to make. Non-use is widespread: an estimated 30% to 50% or more of hearing care clinics do not routinely perform REM.
Another concern is that results depend on the clinician's skill. Hearing aid users on Mayo Clinic Connect report that incorrect probe placement or graph interpretation can lead to uncomfortable or ineffective fittings. In my view, a clinician may assume that settings matching REM targets are best, even when the patient finds them unsatisfactory. Strong confidence in the graphs and professional association bias recommendations can overshadow the patient's experience. Patients may be told, "Be patient; you'll get used to how the hearing aid sounds,” while internally the professional is thinking, “Don't tell me you don't like it, my REM technology says you should like it!"
My approach comes from a two-year apprenticeship with a mentor who held a master's degree in Audiology and had 56 years of experience. He employed 40 people across 14 locations and consistently sold 2,000 pairs of hearing aids annually. He owned REM equipment and taught me to use it, but emphasized that the patient's own ears are the best judge of sound satisfaction and, most importantly, better hearing.
I do not use REM -- not to save time or money, but because nearly 20 years in my own business has convinced me that my mentor was right, even if honest professionals disagree on this issue.
-- -- --
Jeff Bayliff is the owner at Hear the Birds Hearing Aid Center, Lock Haven.